Xiaomi has rolled out the Android 10 update for Mi 9 Lite in the European region. If your Mi 9 Lite runs on an EU or EEA version of ROM, then this one is for you. The update comes with the version number V11.0.1.0.QFCEUXM and accompanied by February security patch along with bug fixes.
As always, the rollout process will be in batches, so you have to wait for the OTA if you have not received it yet. However, if you prefer, you can download the Recovery ROM from this post and install it manually.
On the hardware front, the Mi 9 Lite is powered by the Snapdragon 710 chipset with 6 GB RAM. Coming to the display, it sports a 6.39-inch AMOLED screen with an under-display fingerprint sensor. The backside houses a triple-camera setup with 48MP+8MP+2MP lenses and the front side is accompanied by a 25MP selfie shooter.
Download Official Android 10 Global ROM for Mi 9 Lite
How to Check the Update in your Mi 9 Lite
You can check the OTA by going to Software Updater app which is present in Settings -> About Phone. Make sure that your device is fully charged and connected to Wifi.
If you are not seeing any update in the Software Update, which is normal because of the incremental rollout process of OTA updates, then you can install the update manually. Download the ROM and see the Installation procedure below.
Changelog
System
- Stable MIUI based on Android 10.
- Android security patch updated to February 2020.
- Improved system security.
Download Section
MIUI V11.0.1.0.QFCEUXM (EEA): Recovery ROM | Fastboot ROM
Installation Procedure
Using Updater
Fastboot Method (Manual)
This Method needs an Unlocked Bootloader. If your Device is locked then go here and Unlock it.
Download the MI Flash tool from here and install it.
Download the Fastboot ROM given above.
Step 1: Decompress the Downloaded ROM file
Step 2: Boot the Mi 9 Lite into Fastboot mode by pressing Volume down + Power Button at the same time and Connect it to PC via USB Cable
Step 3: Open the Mi flash tool and in the Address bar, Paste the path of Decompressed ROM file. You can copy the Path by going into the folder and click on the Top bar.
Step 4: After Pasting the Path of decompressed ROM file, Click on “Refresh” button and After that click on “Flash” Button
This will flash the Stock Firmware for Mi 9 Lite.
